HP Color LaserJet 9500 Service Manual - Page 127
Jet-Link cable interface cable,
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Jet-Link cable (interface cable) 1 Remove the back cover. See page 98. 2 Unplug one cable connector (callout 1) from the controller PCA. 3 Open the five cable clips (callout 2), and unroute the cable (callout 3). Figure 91. Note Note 12 2 32 Jet-Link cable (1 of 2) 4 Remove one screw (callout 4). Make sure that you do not drop the screw-holder (callout 5). 5 Unroute and remove the Jet-Link cable and the cable-holder (callout 6). If you cannot easily pull the cable-holder from the metal plate, use needle-nose pliers to pinch the top and bottom edges of the cable-holder together. 42 52 62 Figure 92. ENWW Jet-Link cable (2 of 2) Chapter 6 Removal and replacement 125
ENWW
Chapter 6 Removal and replacement
125
Jet-Link cable (interface cable)
1
Remove the back cover. See page 98.
2
Unplug one cable connector (callout 1) from the controller PCA.
3
Open the five cable clips (callout 2), and unroute the cable (callout 3).
Figure 91.
Jet-Link cable (1 of 2)
4
Remove one screw (callout 4).
Note
Make sure that you do not drop the screw-holder (callout 5).
5
Unroute and remove the Jet-Link cable and the cable-holder (callout 6).
Note
If you cannot easily pull the cable-holder from the metal plate, use needle-nose pliers to pinch the
top and bottom edges of the cable-holder together.
Figure 92.
Jet-Link cable (2 of 2)
2
2
2
1
3
2
2
2
2
6
5
4