HP Color LaserJet 9500 Service Manual - Page 154
Stapler/stacker, Stacker, Stapler/stacker power supply
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Note Power supply See figure 119 for the stapler/stacker or figure 120 for the stacker. 1 Remove the controller PCA cover. See page 135. 2 Unplug the power cable (callout 1) from the power supply. 3 Unplug the cable from the controller PCA (callout 2). 4 Stapler/stacker: Use a Torx #20 screwdriver to remove eight screws (figure 119; callout 3) from the cover, and lift out the power supply and the cover. Stacker: Use a Torx #20 screwdriver to remove one screw (figure 120; callout 3) from the bracket, and lift out the power supply and the bracket. 2 12 32 Figure 119. Stapler/stacker power supply 32 Figure 120. Stacker power supply 152 Removal and replacement ENWW
152
Removal and replacement
ENWW
Power supply
Note
See figure 119 for the stapler/stacker or figure 120 for the stacker.
1
Remove the controller PCA cover. See page 135.
2
Unplug the power cable (callout 1) from the power supply.
3
Unplug the cable from the controller PCA (callout 2).
4
Stapler/stacker:
Use a Torx #20 screwdriver to remove eight screws (figure 119; callout 3)
from the cover, and lift out the power supply and the cover.
Stacker:
Use a Torx #20 screwdriver to remove one screw (figure 120; callout 3) from the
bracket, and lift out the power supply and the bracket.
Figure 119.
Stapler/stacker power supply
Figure 120.
Stacker power supply
2
2
2
1
3
2
2
3