HP Color LaserJet 9500 Service Manual - Page 145
CAUTION, retention wire.
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
5 Use a Torx #20 screwdriver to remove four mount screws (callout 3). 32 Figure 110. Note Note CAUTION Accumulator assembly (3 of 3) Make sure that you remove the accumulator wings and the paper-stop clips before proceeding to step 6. 6 Grasp the accumulator assembly on each side and lift up to clear the tabs. 7 Remove the accumulator assembly. To reinstall To prevent ribbon or staple-cartridge damage, make sure that you correctly install the ribbon retention wire. Do not reinstall the paper-stop clips before you reinstall the accumulator. Reinstalling the accumulator with the clips in place can break the clips. ENWW Chapter 6 Removal and replacement 143
ENWW
Chapter 6 Removal and replacement
143
5
Use a Torx #20 screwdriver to remove four mount screws (callout 3).
Figure 110.
Accumulator assembly (3 of 3)
Note
Make sure that you remove the accumulator wings and the paper-stop clips before proceeding to
step 6.
6
Grasp the accumulator assembly on each side and lift up to clear the tabs.
7
Remove the accumulator assembly.
To reinstall
Note
To prevent ribbon or staple-cartridge damage, make sure that you correctly install the ribbon
retention wire.
CAUTION
Do
not
reinstall the paper-stop clips before you reinstall the accumulator. Reinstalling the
accumulator with the clips in place can break the clips.
2
3