HP Color LaserJet 9500 Service Manual - Page 32

CAUTION Note 3,000-sheet stacker Table 9. Physical specifications-3,000-sheet stacker Specification HP 3,000-sheet stacker Measurements Height: 1,004 mm (39.5 inches) Width: 555 mm (21.8 inches) Depth: 536 mm (21.1 inches) Weight 32 kg (70.5 lb) Table 10. Electrical specifications-3,000-sheet stacker Volts Amperes Frequency (amps) Watts (W) (typical) Thermal units per hour (Btu/hr) 100-127 Vac 50/60 Hz ±10% ±2 Hz Minimum recommended current capacity = 13.0 amp Printing = 1,075 W Standby = 440 W PowerSave 1 = 70 W Low power = 230 W Off = 0.5 W ADF printing = 1,130 W Printing = 3,670 Btu/hr Standby = 1,500 Btu/hr PowerSave 1 = 240 Btu/hr Low power = 785 Btu/hr Off = 1.7 Btu/hr ADF printing = 3,860 Btu/hr 220-240 Vac 50/60 Hz ±10% ±2 Hz Minimum recommended current capacity = 6.5 amp Printing = 1,075 W Standby = 440 W PowerSave 1 = 70 W Low power = 230 W Off = 1.3 W ADF printing = 1,130 W Printing = 3,650 Btu/hr Standby = 1,420 Btu/hr PowerSave 1 = 240 Btu/hr Low power= 785 Btu/hr Off = 4.5 Btu/hr ADF printing = 3,670 Btu/hr Power requirements are based on the country/region where the output device is sold. Do not convert operating voltages. This can damage the output device and void the product warranty. Table 11. Environmental specifications-3,000-sheet stacker Condition Operating/printing Storage/standby Temperature 10° to 33°C (output devices and (50° to 91°F) print cartridge) 0° to 35°C (32° to 95°F) Relative humidity 10% to 80% 15% to 90% Table 12. Acoustic emissions specifications-3,000-sheet stacker Condition Operator position Bystander (1 m) Sound power Copying at 50 ppm Idle PowerSave LPam 57 db(A) LPam 40 db(A) inaudible LPam 60 db(A) LPam 40 db(A) inaudible LWAd 7.3 bels(A) LWAd 5.4 bels(A) inaudible Testing per International Standards Organization (ISO) 9296. 30 Product information ENWW