HP Color LaserJet 9500 Service Manual - Page 152
Stapler/stacker, Stacker, Stapler/stacker controller PCA
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Note Controller PCA See figure 117 for the stapler/stacker or figure 118 for the stacker. 1 Remove the following FRUs: • Face-up bin. See page 129. • Stapler/stacker bin. See page 129. • Back inner cover. See page 130. • Back cover. See page 132. • Controller PCA cover. See page 135. 2 Stapler/stacker: Unplug four ribbon cables, the power cable, and the LED cable (figure 117, callout 1). Stacker: Unplug three ribbon cables, the power cable, and the LED cable (figure 118, callout 1). 3 Loosen two connector screws (callout 2) on the Jet-Link cable, and then disconnect the cable. 4 Use a Torx #20 screwdriver to remove four mount screws (callout 3), and lift the controller PCA out of the output device. 32 2 12 32 Figure 117. Stapler/stacker controller PCA 150 Removal and replacement ENWW