HP Color LaserJet 9500 Service Manual - Page 141
Accumulator wings stapler/stacker only, To prevent a malfunction
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Accumulator wings (stapler/stacker only) 1 Grasp each accumulator wing near the shaft. 2 Slide the wings toward the center of the shaft. 3 Apply slight downward pressure to disengage the wings. 4 Press the locking tabs (callout 1) on the rotation pins, and push the pins out of the mounting holes. Figure 106. Note 21 Accumulator wings To reinstall To prevent a malfunction, make sure that you install the left wing and the right wing on the correct sides. ENWW Chapter 6 Removal and replacement 139
ENWW
Chapter 6 Removal and replacement
139
Accumulator wings (stapler/stacker only)
1
Grasp each accumulator wing near the shaft.
2
Slide the wings toward the center of the shaft.
3
Apply slight downward pressure to disengage the wings.
4
Press the locking tabs (callout 1) on the rotation pins, and push the pins out of the mounting
holes.
Figure 106.
Accumulator wings
To reinstall
Note
To prevent a malfunction, make sure that you install the left wing and the right wing on the correct
sides.
2
2
2
1