HP Color LaserJet 9500 Service Manual - Page 231
The face-up bin is full., If, after you replace the interlock switch, the message persists
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Table 30. Control panel and event log messages-8-bin mailbox (continued) Control panel message Event log User LED Service LED Description Output paper path open None Amber blinking Not available The 8-bin mailbox is not attached correctly to the printer or MFP. Recommended action: 1 Make sure that the attachment bracket and magnets are installed correctly. 2 Make sure that the 8-bin mailbox casters are leveled correctly. 3 Make sure that no cables are in between the output device and the printer or MFP. 4 Verify the functionality of the interlock switch and replace the switch if appears to be broken. 5 Verify cable connections of the interlock switch. 6 If the cables are connected, but the message persists, then replace the interlock switch. 7 If, after you replace the interlock switch, the message persists, then replace the controller PCA. Upper bin full None Amber blinking Red solid The face-up bin is full. Recommended action: 1 Remove the media from the face-up bin. 2 If the message persists when the face-up bin is empty, make sure the FACEUP sensor flag moves freely. 3 Make sure that the face-up bin is not damaged. 4 Make sure that the sensor is functioning correctly. 5 If the message persists, replace the flipper assembly. ENWW Chapter 7 Troubleshooting 229