HP Color LaserJet 9500 Service Manual - Page 128
Adjustable casters left side, Front left caster
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Note Adjustable casters (left side) For safety, first remove the stapling unit (see page 104), and then gently lay the multifunction finisher on its side. (Figure 93 shows the multifunction finisher in an upright position.) Front left caster 1 Remove the front cover. See page 96. 2 Remove the e-clip (figure 93, callout 1) from the metal pin. 3 Slide the caster shaft out, and remove the caster. Back left caster 1 Remove the back cover. See page 98. 2 Remove the e-clip (callout 1) from the metal pin. 3 Slide the metal pin out, and remove the caster. 12 Figure 93. Adjustable casters 126 Removal and replacement ENWW
126
Removal and replacement
ENWW
Adjustable casters (left side)
Note
For safety, first remove the stapling unit (see page 104), and then gently lay the multifunction
finisher on its side. (Figure 93 shows the multifunction finisher in an upright position.)
Front left caster
1
Remove the front cover. See page 96.
2
Remove the e-clip (figure 93, callout 1) from the metal pin.
3
Slide the caster shaft out, and remove the caster.
Back left caster
1
Remove the back cover. See page 98.
2
Remove the e-clip (callout 1) from the metal pin.
3
Slide the metal pin out, and remove the caster.
Figure 93.
Adjustable casters
2
1