HP Color LaserJet 9500 Service Manual - Page 143

Accumulator assembly (stapler/stacker only) 1 Remove the following FRUs: • Face-up bin. See page 129. • Stapler/stacker bin. See page 129. • Back inner cover. See page 130. • Front inner cover. See page 130. • Front cover. See page 131. • Back cover. See page 132. • Controller PCA cover. See page 135. • Accumulator wings. See page 139. • Paper-stop clips. See page 140. 2 Unplug the ribbon cable (callout 1) from the controller PCA by pressing the black tabs on the cable connector. 12 Figure 108. Note Accumulator assembly (1 of 3) 3 Push the ribbon cable up through the hole. Removal of the carriage assembly is not required, but removing it makes removing and reinstalling the accumulator very easy. See "Carriage assembly (stapler/stacker only)" on page 144. ENWW Chapter 6 Removal and replacement 141