HP Color LaserJet 9500 Service Manual - Page 183
Metal tape and housing assembly, WARNING,
View all HP Color LaserJet 9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
WARNING! Note Metal tape and housing assembly 1 Remove the following FRUs: • Output bin. See page 167. • Blind cover. See page 167. • Paper bins. See page 167. The metal tape has sharp edges. 2 Hold the metal tape toward the end and use a flatblade screwdriver to push and release the retainer tab (callout 1) that secures the end of the tape. Let the tape slowly rewind into its housing. 3 Remove one screw (callout 2). 1 2 Figure 159. Metal tape and housing assembly (1 of 2) ENWW Chapter 6 Removal and replacement 181
ENWW
Chapter 6 Removal and replacement
181
Metal tape and housing assembly
1
Remove the following FRUs:
•
Output bin. See page 167.
•
Blind cover. See page 167.
•
Paper bins. See page 167.
WARNING!
The metal tape has sharp edges.
2
Hold the metal tape toward the end and use a flatblade screwdriver to push and release the
retainer tab (callout 1) that secures the end of the tape.
Note
Let the tape slowly rewind into its housing.
3
Remove one screw (callout 2).
Figure 159.
Metal tape and housing assembly (1 of 2)
1
2