HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem ISCLI Referenc - Page 123
IGMP static multicast router configuration, ip igmp snoop enable
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Table 138 IGMP Snooping commands Command ip igmp snoop vlan no ip igmp snoop vlan no ip igmp snoop vlan all [no] ip igmp snoop vlan fastleave ip igmp snoop enable no ip igmp snoop enable show ip igmp snoop Description Adds the VLAN to IGMP Snooping. Command mode: Global configuration Removes the VLAN from IGMP Snooping. Command mode: Global configuration Removes all VLANs from IGMP Snooping. Command mode: Global configuration Enables or disables FastLeave processing. FastLeave allows the switch to immediately remove a port from the IGMP port list, if the host sends a Leave message, and the proper conditions are met. This command is disabled by default. Command mode: Global configuration Enables IGMP Snooping. Command mode: Global configuration Disables IGMP Snooping. Command mode: Global configuration Displays the current IGMP Snooping parameters. Command mode: All except User EXEC IGMP static multicast router configuration The following table describes the Static Multicast Router Configuration commands. NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is disabled for that VLAN. Table 139 IGMP Static Multicast Router commands Command Description ip igmp mrouter Selects a port/VLAN combination on which the static multicast router is connected, and configures the IGMP version (1 or 2) of the multicast router. Command mode: Global configuration NOTE: Port number must be an external port (19-24). no ip igmp mrouter Removes a static multicast router from the selected port/VLAN combination. Command mode: Global configuration show ip igmp mrouter Displays the current IGMP Static Multicast Router parameters. Command mode: All except User EXEC Configuration Commands 123