HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem ISCLI Referenc - Page 96
Port configuration, interface port, dot1p <, no] rmon, no] tagging, no] tag-pvid - ethernet blade switch configuration
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Port configuration Use the port configuration commands to configure settings for individual switch ports. NOTE: Port 19 is reserved for switch management. The following table describes the Port Configuration commands. The following sections provide more detailed information and commands. Table 96 Port Configuration commands Command Description interface port {} Enter Interface Port configuration mode for the selected port. Command mode: Global configuration dot1p Configures the port's 802.1p priority level. Command mode: Interface port pvid {} Sets the default VLAN number which will be used to forward frames which are not VLAN tagged. The default number is 1. Command mode: Interface port NOTE: VLAN 4095 is reserved for switch management. name {} Sets a name for the port (maximum 64 characters). The assigned port name displays next to the port number on some information and statistics screens. Command mode: Interface port [no] rmon Enables or disables Remote Monitoring for the port. RMON must be enabled for any RMON configurations to function. Command mode: Interface port [no] tagging Disables or enables VLAN tagging for this port. It is disabled by default. Command mode: Interface port [no] tag-pvid Disables or enables VLAN tag persistence. When disabled, the VLAN tag is removed from packets whose VLAN tag matches the port PVID. The default value is enabled. Command mode: Interface port copper Configures the port's transmission media as copper. This command is available only for uplink ports. This command is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. fiber Configures the port's transmission media as fiber. This command is available only for uplink ports. This command is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. auto-mode Configures the port's transmission media as auto. This command is available only for uplink ports. This command is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. broadcast-threshold {} Limits the number of broadcast packets per second to the specified value. If disabled (dis), the port forwards all broadcast packets. Command mode: Interface port multicast-threshold {} Limits the number of multicast packets per second to the specified value. If disabled (dis), the port forwards all multicast packets. Command mode: Interface port dest-lookup-threshold {} Limits the number of unknown unicast packets per second to the specified value. If disabled (dis), the port forwards all unknown unicast packets. Command mode: Interface port no shutdown Enables the port. Command mode: Interface port Configuration Commands 96