HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem ISCLI Referenc - Page 142
Operations-level VRRP options, interface port {<, >} dot1x re, authenticate, router vrrp backup
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Table 176 Operations-Level Port 802.1x commands Command interface port {} dot1x reauthenticate Description Re-authenticates the supplicant (client) attached to the port. This command only applies if the port's 802.1x mode is configured as auto. Command Mode: Privileged EXEC Operations-level VRRP options NOTE: VRRP commands are available only on the GbE2c Layer 2/3 Ethernet Blade Switch. Operations-level VRRP options are described in the following table. Table 177 Operations-Level VRRP commands Command router vrrp backup Description Forces the specified master virtual router on this switch into backup mode. This is generally used for passing master control back to a preferred switch once the preferred switch has been returned to service after a failure. When this command is executed, the current master gives up control and initiates a new election by temporarily advertising its own priority level as 0 (lowest). After the new election, the virtual router forced into backup mode by this command will resume master control in the following cases: • This switch owns the virtual router (the IP addresses of the virtual router and its IP interface are the same) • This switch's virtual router has a higher priority and preemption is enabled. • There are no other virtual routers available to take master control. Command Mode: Privileged EXEC Operations Commands 142