HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem ISCLI Referenc - Page 98
ACL Port configuration, Layer 2 configuration, 802.1x configuration
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
ACL Port configuration The following table describes the basic Access Control List Configuration commands for the port. Table 98 ACL Port Configuration commands Command Description [no] access-control list Adds or removes the specified ACL. Command mode: Interface port [no] access-control group Adds or removes the specified ACL Group. Command mode: Interface port show interface port [] Displays current ACL QoS parameters. access-control Command mode: All Layer 2 configuration The following table describes the Layer 2 Configuration commands. The following sections provide more detailed information and commands. Table 99 Layer 2 Configuration commands Command vlan {} [no] spanning-tree uplinkfast spanning-tree uplinkfast max-update-rate show layer2 Description Enter VLAN configuration mode. Command mode: Global configuration Enables or disables Fast Uplink Convergence, which provides rapid Spanning Tree convergence to an upstream switch during failover. Note: When enabled, this feature increases bridge priorities to 65500 for all STGs and path cost by 3000 for all external STP ports. Command mode: Global configuration Configures the station update rate, in packets per second. The range is 10-200. The default value is 40. Command mode: Global configuration Displays current Layer 2 parameters. Command mode: All 802.1x configuration This feature allows you to configure the GbE2c as an IEEE 802.1x Authenticator, to provide port-based network access control. The following table describes the 802.1x Configuration commands. Table 100 802.1x Configuration commands Command dot1x enable no dot1x enable show dot1x Description Globally enables 802.1x. Command mode: Global configuration Globally disables 802.1x. Command mode: Global configuration Displays current 802.1x parameters. Command mode: All Configuration Commands 98