HP LH4r HP Netserver LH 3000 Installation Guide - Page 133
Monitor, when the Keyboard Lock or Network Server Mode are also
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 10 Configuring the HP NetServer 16. Press Enter to toggle [Disabled] to "Enabled" in the Video Blanking [Disabled] field. Setting this feature only provides a blank screen on the HP NetServer's Monitor, when the Keyboard Lock or Network Server Mode are also enabled. The screen remains blank until the password is typed and only applies to the monitor connected to the HP NetServer's embedded video connection. As with the other features the Video Blanking is dependent upon, you must set the password before enabling this feature. 17. To use the Hardware Security menu under Security, use the help files provided with the selections. 18. Select the Esc key to exit this menu. 19. Use the right-arrow key to go to the Exit menu. 20. Choose Exit Saving Changes from the list of exit options, and then press Enter. A dialog appears and asks you to confirm your decision. 21. Choose Yes and then press the Enter key. Then the HP NetServer reboots. 22. To change one of the passwords at a later date, return to the Security menu and repeat Steps 2 through 7, above, for one or both passwords. NOTE The HP NetServer allows you to reset the password by toggling a switch (position 6) in the Configuration Switch Block on the System board. 125