HP LH4r HP Netserver LH 3000 Installation Guide - Page 72
The PCI non-hot-plug slot covers use a black retainer and
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 6 Installing Additional PCI Boards 8. Release the front board hold-down and remove it. Front board hold-down Figure 6-2. Remove Front Board Hold-Down 9. Remove the slot cover from the target slot (number 3 in this example) by rotating the solid latch first and the latch with the small opening second. NOTE The PCI non-hot-plug slot covers use a black retainer and a blue locking lever to hold the slot cover and board in place, instead of a screw commonly used on HP NetServers. 64
Chapter 6
Installing Additional PCI Boards
64
8.
Release the front board hold-down and remove it.
Front board hold-down
Figure 6-2. Remove Front Board Hold-Down
9.
Remove the slot cover from the target slot (number 3 in this example) by
rotating the solid latch first and the latch with the small opening second.
NOTE
The PCI non-hot-plug slot covers use a black retainer and a
blue locking lever to hold the slot cover and board in place,
instead of a screw commonly used on HP NetServers.