HP LH4r HP Netserver LH 3000 Installation Guide - Page 44
Removing the LH 3000 Covers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 3 Opening and Closing the HP NetServer Removing the LH 3000 Covers 1. Unlock the bezel, using the supplied key. The bezel connects to the chassis with two snap-in connectors inside its top left and right corners and two tabs that fit into two slots on the bottom of the chassis. 2. Remove the bezel. a. Pull bezel toward you until it unsnaps. b. Lift the bezel forward and upward from the chassis face. Pull bezel toward you, then up and away from the front panel, releasing the tabs from the slots at the bottom of the front panel. 2. 3. 1. Figure 3-8. Removing the HP NetServer LH 3000 Bezel CAUTION The NetServer covers are heavy. Support them as you remove them, and allow room to move them away from the NetServer and for storage when removed. 36