HP LH4r HP Netserver LH 3000 Installation Guide - Page 65
Install the DIMMs
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 5 Installing Additional Memory 7. Slide the system board assembly from the chassis and place it metal plate side down on an anti-static pad. 8. Install the DIMMs: a. Spread the latches outward on each socket to receive a DIMM. b. Remove a DIMM from its anti-static bag, handling the module by its edges. c. Align the notches on the DIMM with the slot keys on the socket. CAUTION Do not rock the DIMM into place, but apply firm and even pressure. If a gap exists between the retaining latches and the DIMM, remove and replace the module until no gap exists. Align DIMM notches with slot keys. Figure 5-5. Align DIMM Notches with slot keys d. Press the DIMM into the socket until the latches close. NOTE If the latches do not close, repeat until they do. 57