HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 138

The Linux mount command Use the following syntax to mount a filesystem. The directory mountpoint must already exist. mount -t psfs -o options device mountpoint The device can be either a psd or psv device. Use this syntax to specify the device: • For a psd device partition, the device is specified as /dev/psd/psdXXXpYY, where XXX is the drive number and YY is the partition number. For example, / dev/psd/psd6p4 specifies partition 4 on disk psd6. • For a non-partitioned psd device, the device is specified as /dev/psd/psdXXX, where XXX is the drive number. For example, /dev/psd/psd5. • For a psv device, the device is specified as /dev/psv/psvXXX, where XXX is the volume number. For example, /dev/psv/psv1. For example, the following command mounts the filesystem on the partition /dev/ psd/psd12p6 in read-write mode at the mountpoint /data1. mount -t psfs -o rw /dev/psd/psd12p6 /data1 If you are mounting a filesystem with quotas, you will need to include the following options to enable the user and/or group quota functionality of the Linux quota commands: • For user quotas, specify either -o usrquota or -o quota. • For group quotas, specify -o grpquota. If the SELinux security policy is set to "enforcing," the mount context option must be specified as follows when mounting a PSFS filesystem: -o context=system_u:object_r:nfs_t The following mount options are not supported: • The -o atime option. Instead, use the PSFS filesystem atime update feature. (See Configure atime updates, page 151.) • Use of the remount option to change the way a filesystem is mounted. For example, you cannot use mount -o remount,rw to remount a filesystem as readwrite if it was originally mounted read-only. The mount operation ignores any options that are not supported by the PSFS filesystem. See mount_psfs(8) for more information. 138 Configure PSFS filesystems