HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 343

To enable a Global Event Delay from the command line, use this command: mx device globalsettings [--eventdelay ] If you do not specify the --eventdelay option, the command will return the current value of the Global Event Delay. Other configuration procedures These procedures can be performed from the Servers or Applications tab on the Management Console. Locate the appropriate device monitor and then right-click to see the available procedures. Delete a device monitor Select the device monitor to be deleted, right-click, and select Delete. To delete a device monitor from the command line, use this command: mx device delete ... Disable a device monitor Select the device monitor to be disabled, right-click, and select Disable. To disable a device monitor from the command line, use this command: mx device disable ... Enable a device monitor Select the device monitor to be enabled, right-click, and select Enable. To enable a device monitor from the command line, use this command: mx device enable ... Clear device monitor error To clear an error from a device monitor, select that monitor, right-click, and select Clear Last Event. To clear the device error from the command line, use this command: mx device clear ... HP Scalable NAS File Serving Software administration guide 343