HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 84

Server: The name or IP address of the server to include the new network interface. IP: Type the IP address for the network interface. Netmask: Type the net mask for the network interface. Allow Administrative Traffic: Specify whether the network interface can host administrative traffic for HP Scalable NAS. The options are: • Allow. The default is to allow the traffic. • Discourage. This network will be used for administrative traffic only if no other network is available. When a network that allows the traffic becomes available to all servers in the cluster, the administrative traffic will fail over to that network. • Exclude. This network will never be used for administrative traffic. To add a network interface from the command line, use this command: mx netif add --server --netmask [--adminTraffic ] To modify a network interface, use this command: mx netif update --netmask [--adminTraffic ] Remove a stale network interface This option can be used to remove stale HP Scalable NAS configuration information. For example, you may have changed the network definition for an interface, but the original, now stale, network information is still present in the HP Scalable NAS configuration. To remove the stale network interface from the configuration, select that interface on the Servers window, right-click, and then select Delete. The mx command to remove a network interface is as follows: mx netif delete 84 Configure network interfaces