HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 373

this utility could result in filesystem corruption. Do you wish to continue? y SUCCESS 99.10.20.4 has been marked as down. CAUTION: Be sure to verify that the server is physically down before running the mx server markdown command. Filesystem corruption can occur is the server is not actually down. If mx server markdown is run for a server that is up and in communication with the cluster, the following message will be displayed: Do you wish to continue? y ERROR 99.10.20.3 is not down! If the command is run for a server that is up but out of communication with the cluster (for example, the server has lost network connectivity but has not been rebooted), the mx server markdown command will succeed. However, if the server later regains network connectivity to the cluster, an alert such as the following will be displayed: Operator error may have caused filesystem corruption! 99.10.20.4 returned to the cluster without being rebooted, even though the operator verified that 99.10.20.4 was down. It is recommended that all filesystems that 99.10.20.4 had mounted be checked for corruption. This alert will display for 48 hours. Storage Online insertion of new storage HP Scalable NAS supports online insertion (OLI) of new storage, provided that OLI support is present for your combination of storage device, SAN fabric, HBA vendor-supplied device driver, and the associated HBA vendor-supplied libhbaapi. (Check with your vendors to determine whether OLI is supported.) When this lower-level OLI support is in place, inserting a new disk will cause a new device to automatically become eligible for importing. The disk can be imported with HP Scalable NAS File Serving Software administration guide 373