HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 142

Mount the administrative filesystem on new nodes When a new node is added to the cluster, you will need to mount the administrative filesystem on the node. Select the filesystem on the Management Console, right-click, and select Add Mount, or click Mount on the toolbar. On the Mount Filesystem window, select the new server from the On Servers pane and click OK. (Do not change the default mount options.) The filesystem will be mounted immediately at the mount point specified on the Mount Filesystem window. You can also use the following command to mount the filesystem: mx fs mount --path [--persist] [--activate] For example, the following command mounts the filesystem on volume psv53 at mountpoint /_adminfs on server qars5. The filesystem is mounted persistently and the mount takes place immediately. mx fs mount --path /_adminfs --persist --activate psv53 qars5 Enlarge the administrative filesystem The administrative filesystem can be enlarged if necessary. See the description of the mx config adminfs extend command in the HP Scalable NAS File Serving Software command reference guide for more information. Unmount a filesystem You can unmount a PSFS filesystem from either the Management Console or the command line. Unmount from the Management Console The Management Console provides two ways to unmount a filesystem: • To unmount a filesystem on one server, select the "Mounted" entry for that server on the Filesystems window, right-click, and select Unmount. The filesystem will then be unmounted. • To unmount a filesystem on more than one server, select the filesystem on the Filesystems window, right-click, and select Unmount. When the Unmount Filesystem window appears, select the servers where the filesystem is to be unmounted. 142 Configure PSFS filesystems