HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 333

Device name: Type the name of the device monitor. You can use up to 32 alphanumeric characters. Application name: Specify the name of the HP Scalable NAS application to be associated with this device monitor. HP Scalable NAS applications are used to group related virtual hosts, service monitors, and device monitors on the Applications tab. If you leave this field blank, HP Scalable NAS will use the name of the device monitor as the application name. Device type: Select the appropriate device type (DISK, CUSTOM, or SHARED_FILESYSTEM). Timeout and Frequency: These fields are set to the default values for the type of device you have selected. Change them as needed. The other monitor parameters are dependent on the type of monitor that you are creating. • DISK monitor. At the "Monitor partition" prompt, specify a partition on the disk. The monitor will periodically attempt to read the first block of this partition to determine whether the disk is operating normally. Type the full partition name such as /dev/sda1. • CUSTOM monitor. At the "User probe script" prompt, specify the pathname to the probe script to be used with the monitor. See Custom scripts, page 345 for information about writing probe scripts. • SHARED_FILESYSTEM monitor. At the "Filesystem" prompt, select the filesystem that is to be monitored. The "Filename" parameter is optional. Enter the name of a file that the monitor probe should open and attempt to read to determine the health of the filesystem. The filename should be relative to the mount point of the filesystem. When the filesystem is mounted, the mountpath will be prepended to the filename to determine the complete filename path that should be probed. If HP Scalable NAS File Serving Software administration guide 333