HP ProLiant DL380G5-WSS 3.7.0 HP StorageWorks HP Scalable NAS File Serving Sof - Page 341
Activity Type., Available Servers/Selected Servers., Available Servers
View all HP ProLiant DL380G5-WSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Activity Type. Where the monitor can be active. The options are: • Single-Active. The monitor is active on only one of the selected servers. Upon server failure, the monitor will fail over to an active server unless all associated service and device monitors are down. ("Associated" service and device monitors are those monitors that are associated with the same virtual host as this device monitor.) • Single-Always-Active. The monitor is active on only one of the selected servers. Upon server failure, the monitor will fail over to an active server even if all associated service and device monitors are down. ("Associated" service and device monitors are those monitors that are associated with the same virtual host as this device monitor.) • Multi-Active. The monitor is active simultaneously on all selected servers. This option sets the probe type to Multi-Probe. The Selected Servers column will not display P or B (for primary or backup). Available Servers/Selected Servers. The type of the device monitor affects whether the monitor should be configured on one or multiple servers. • Typically a DISK device monitor is configured on one server. • For SHARED_FILESYSTEM monitors, select the servers that mount the monitored filesystem and are running the applications that access data from that filesystem. • Depending on their purpose, CUSTOM monitors can be configured on one or more servers. Use the arrows to move the appropriate server or servers from the "Available Servers" column to the "Selected Servers" column. For a Single-Active or Single-Always-Active monitor configured on multiple servers, use the Up and Down buttons to order the servers. The first server in the list is the primary server and the remaining servers are backups. To specify servers from the command line, use this option: --servers ,,... To specify the Probe Type for a custom monitor, use this option: --probe single|active|multiple To specify the Activity Type, use this option: --activity single|multiple HP Scalable NAS File Serving Software administration guide 341