HP SW TL881 DLT Mini-Lib/1 Compaq TL881 MiniLibrary System Users Guide (May 19 - Page 140
Fault Symptom Codes FSC, Table 6-2
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Diagnostics and Troubleshooting 6-5 Fault Symptom Codes (FSC) Fault Symptom Codes (FSCs) are in the Fault Screen described in Chapter 2. Each FSC is accompanied by a descriptive message and instructions for clearing the fault. When a fault persists, the operator should look up the FSC in Table 6-2 to determine the error recovery procedure to be followed. If you call Compaq Technical Support about a fault condition, be sure to furnish the FSC to aid in identifying the problem. FSC 0101 0102 0103 0201 0301 0302 0303 0304 0305 0306 Table 6-2 Fault Symptom Codes System Error Codes 0xxx Message Description Unused Interrupt An undefined interrupt occurred. Enqueue'g a Null Ptr A NULL pointer was passed to one of the enqueing functions. This is generally a firmware bug. Invalid Cmd Rec'd An illegal trace command was received by the trace process. Trc Comm Open Error The trace port could not be opened. Novram Init Error A failure occurred when trying to initialize the Novram. Novram Chksum Error A checksum error was detected while reading the Novram. Novram Program Error A problem was detected while trying to update the Novram. Novram Downld Error An error was detected while trying to download configuration data. Novram Data Error An error was detected while trying to validate the Novram. Novram Update Error A problem was detected while trying to update the Novram. continued