HP SW TL881 DLT Mini-Lib/1 Compaq TL881 MiniLibrary System Users Guide (May 19 - Page 32
Power Switch, Control Panel, The Base Module Control Panel contains four LED indicators,
![]() |
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2-6 Compaq TL881 Minilibrary System Users Guide Power Switch The power switch controls the supply of AC power to the module. The switch is recessed into the front panel to prevent accidental power-up or power-down. Press 1 to turn the module on and press 0 to turn the module off. Control Panel The Base Module Control Panel (Figure 2-4) contains four LED indicators, a four-line by 20-character backlit LCD display, and four pushbuttons. LED Indicators The four LED indicators on the Control Panel are labeled Ready (green), Use Cleaner (yellow), Drive Fault (red), and Loader Fault (red). s Ready (green) - lights when the Base Module is ready to accept commands, either from the Control Panel or from the host computer via the Expansion Unit. The Ready indicator goes out when you enter the Menu Mode. s Use Cleaner (yellow) - indicates that either or both drives require cleaning. A cleaning operation should be done as described in Chapter 5, Regular Maintenance. When the Use Cleaner LED comes on, you can find out which drive needs cleaning by selecting Cleaning Needed on the Drive status submenu. s Drive Fault or Loader Fault (red) - lights when a Fault Screen appears on the LCD display. The Fault Screen is described later in this chapter. A list of Fault Symptom Codes (FSC) and Error Recovery Procedures (ERP) appears in Chapter 5, Regular Maintenance.
![](/manual_guide/products/hewlettpackard-sw-tl881-dlt-minilib1-compaq-tl881-minilibrary-users-guide-1999-c1e9e06/32.png)