HP SW TL881 DLT Mini-Lib/1 Compaq TL881 MiniLibrary System Users Guide (May 19 - Page 80
Holding the ends of the belt as shown in the two ends should
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installation 3-11 7. Referring to Figure 3-6, thread the belt from the motor drive counterclockwise around the idler pulley and back to the right end. 8. Holding the ends of the belt as shown in Figure 3-7, the two ends should be touching or very slightly overlapping. Figure 3-6. Threading the Belt through the Base Section SHR-1238
Installation
3-11
7.
Referring to Figure 3-6, thread the belt from the motor drive counter-
clockwise around the idler pulley and back to the right end.
8.
Holding the ends of the belt as shown in Figure 3-7, the two ends should
be touching or very slightly overlapping.
SHR-1238
Figure 3-6.
Threading the Belt through the Base Section