HP SW TL881 DLT Mini-Lib/1 Compaq TL881 MiniLibrary System Users Guide (May 19 - Page 29
Troubleshooting., to the Default Screen. The Default Screen and the Main Menu are
View all HP SW TL881 DLT Mini-Lib/1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Operation 2-3 s Fault (red) - indicates that a fault has occurred in the Expansion Unit, or that the magazine door is unable to close. When the Fault LED is lighted, a Fault Screen appears on the LCD display. The Fault Screen is described later in this chapter. A list of fault symptom codes (FSC) and error recovery procedures (ERP) appears in Chapter 6, Diagnostics and Troubleshooting. Ready Alert Escape Enter Fault Figure 2-2. Expansion Unit Control Panel SHR-1229 Pushbuttons There are four buttons on the control panel, labeled Escape, Enter, , and The buttons do not directly control specific functions or options. Instead, you use the buttons to navigate from the Default Screen through a multi-level menu structure, then select the desired option from the appropriate menu using the Enter button. Table 2-1 describes the effect of each of the four buttons under various conditions. The three most important things you need to know about the buttons are: 1. To enter the Menu Mode and display the Main Menu from the Default Screen, press the Enter button. 2. To return to the Main Menu from a submenu, press the Escape button repeatedly until the Main Menu appears. Pressing the Escape button while the Main Menu is displayed exits the Menu Mode and returns you to the Default Screen. The Default Screen and the Main Menu are shown later in this chapter.