HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 116

Chapter 4 Running Diagnostic Tests Table 12 Note Diagnostics are also available from HP Library & Tape Tools (see HP Library & Tape Tools on page 146). For additional troubleshooting procedures specific to your drive technology, see Drives and Media on page 143. Diagnostic tests let you exercise certain aspects of the library's operation. Tests are listed in Table 12 on page 115. 20/700 Library Drive Diagnostic Tests Test Description CLEAN DRIVE This function is not a test. It moves a specified cleaning cartridge from the CAP to a drive and initiates drive cleaning. When cleaning is completed, it will return the cleaning cartridge to the CAP. This routine does not require the library to be inactive. MOUNT Mounts a diagnostic tape to the selected drive. DISMOUNT Dismounts a diagnostic tape from the selected drive. RUN DRIVE CHECK Determines whether the specific drive is functioning. This test applies to DLT 8000 and 9840 drives only. MOUNT/ Mounts and dismounts a diagnostic tape on the DISMOUNT LOOP selected drive. Note: 9840 drives must have firmware version 1.28 or higher. Caution Potential system problem: Diagnostic tests should be performed only by trained personnel. Before performing the diagnostic tests, be sure that the library and drives are inactive. Chapter 4 Operating in Automated Mode 115