HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 85
Setting the Subnet Mask Address, Network Config Menu, SUBNET MASK, SELECT], MENU], Configuration Menu
![]() |
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Setting the Subnet Mask Address This is a four-byte notation (specified by the system administrator) to resolve routing within your intranet. This address makes the library accessible through a subnet on a large network. An example of a subnet mask entry is 255.255.254.0. To set the subnet mask address: 1. At the Network Config Menu, press an arrow button until the cursor underscores SUBNET MASK. 2. Press the [SELECT] button. An editing screen appears. 3. On the editing screen: a. Press the up and down arrow buttons to select a value for each threedigit field in the address. b. Press the [SELECT] button to move right to the next field. c. Press the [MENU] button to move left to the previous field. 4. Press the [SELECT] button from the right-most field when the screen displays your desired setting to save the changes. (You may press the [MENU] button from the left-most field to abort.) 5. If you have already changed the library's SCSI ID and are planning to exit the main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section. If you have not changed the library's SCSI ID and are not setting other configuration values, press the [MENU] button until you exit all menus. 84 Entering Configuration Data Chapter 3
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-20700-hp-surestore-tape-library-model-20700-user039s-guide-550878d/85.png)