HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 87

Note You may press the [MENU] button from the left-most field to abort. Setting the Secondary DNS Server's IP Address The third entry you may make is the secondary DNS server's IP address. Note The secondary DNS server's IP address is available for sites that have a secondary (or backup) server. If your site does not have a secondary server, this entry is not required. 1. Press the arrow button until the cursor underscores SVR Secondary. 2. On the editing screen: a. Press the up and down arrow buttons to select a value for each number in the secondary domain server's IP address. b. Press the [SELECT] button to move right to the next field. c. Press the [MENU] button to move left to the previous field. Press the [SELECT] button. An editing screen appears. 3. When the screen displays your desired setting, press the [SELECT] button (from the right-most field) to save the changes. Note You may press the [MENU] button from the left-most field to abort. If you are planning to exit the Main Configuration Menu at this time, you must press the [RESET] button. If you wish to set other configuration values, continue with the next section. If you have not changed the library's DNS configuration and are not setting other configuration values, press the [MENU] button until you exit all menus. 86 Entering Configuration Data Chapter 3