HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 39
Indicators, Buttons, Library Active, Service, Required, Service Required, CAP A], RESET], MENU]
![]() |
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Indicators Buttons Three indicators provide basic status information: Library Active, Service Required, and Open. Refer to Table 3 on page 37 for details about these indicators. Note When the Service Required indicator is on, contact your service provider. Seven buttons are provided on the operator panel: [CAP A], [CAP B], [RESET], [MENU], [SELECT], and the up and down arrows. The [CAP] and [RESET] buttons let you directly manipulate the library; the remaining four buttons let you manipulate the menus and underscored values on the graphic display. Refer to Figure 6 on page 36 and Table 3 on page 37 for the location and a description of each button. Note The up arrow, down arrow, [MENU] and [SELECT] buttons manipulate only values that are under operator control. As you scroll down or up a list of selections, the cursor underscores these values. (You cannot manipulate values that do not permit underscoring.) 38 Operator Panel Chapter 2
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-20700-hp-surestore-tape-library-model-20700-user039s-guide-550878d/39.png)