HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 28
Drive Entries, Drive Status, Loading/Unloading Cartridges Manually,
![]() |
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 1 The maximum number of DLT or Ultrium drives is 20. The maximum number of 9840 drives is 12. As an operator, you might have to: I Configure a drive in a library; refer to Drive Entries on page 76. I Check drive status information; refer to Drive Status on page 98. I Manually mount a cartridge to a drive or dismount a cartridge from a drive; refer to Loading/Unloading Cartridges Manually on page 131. Note During typical operation (or automated mode), the library's robotic hand-camera assembly automatically places a cartridge into the drive or removes a cartridge from the drive when a command is sent from the host software. Chapter 1 Tape Library Components 27
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-20700-hp-surestore-tape-library-model-20700-user039s-guide-550878d/28.png)
Chapter 1
Tape Library Components
27
Chapter 1
The maximum number of DLT or Ultrium drives is 20. The maximum number of
9840 drives is 12.
As an operator, you might have to:
■
Configure a drive in a library; refer to
Drive Entries
on page 76.
■
Check drive status information; refer to
Drive Status
on page 98.
■
Manually mount a cartridge to a drive or dismount a cartridge from a
drive; refer to
Loading/Unloading Cartridges Manually
on page 131.
Note
During typical operation (or automated mode), the library’s
robotic hand-camera assembly automatically places a cartridge
into the drive or removes a cartridge from the drive when a
command is sent from the host software.