HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 133
Locating a Cartridge in the Storage Cells, Operate Handle, Operate, Handle
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
To load a cartridge into a DLT drive: 1. Open the tape library right front door by pulling on the left side of the door. 2. Open the library left front door by using a latch key to unlock both locks. See Figure 32 on page 123. Turn the key counter clockwise to unlock them, then pull open the door. 3. Locate the cartridge (see Locating a Cartridge in the Storage Cells on page 127). 4. Make sure the DLT handle is up (see Figure 37 on page 133) and the Operate Handle indicator is steadily on. Note If the handle is in the down position, wait for the Operate Handle indicator to remain on steadily before moving it to the up position (see Figure 37 on page 133). If the Operate Handle indicator is flashing while the handle is up, move the handle to the down position and wait for the Operate Handle indicator to remain on steadily. Then move the handle to the up position. 132 Manual Operation Chapter 4