HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 137
Loading a Cartridge into an Ultrium Drive, Locating a Cartridge in the Storage Cells
![]() |
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Loading a Cartridge into an Ultrium Drive To load a cartridge into a Ultrium drive: 1. Ensure that the drive is not in use. Caution Possible equipment problem: You must open the library's front door before attempting to manually mount a cartridge to an Ultrium drive. A unique communication between the library and drive prepares the drive for manual operation. 2. Open the tape library right front door by pulling on the left side of the door. 3. Open the library left front door by using a latch key to unlock both locks. See Figure 32 on page 123. Turn the key counter clockwise to unlock them, then pull open the door. 4. Locate the cartridge (see Locating a Cartridge in the Storage Cells on page 127). 136 Manual Operation Chapter 4
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-20700-hp-surestore-tape-library-model-20700-user039s-guide-550878d/137.png)
136
Manual Operation
Chapter 4
Loading a Cartridge into an Ultrium Drive
To load a cartridge into a Ultrium drive:
1.
Ensure that the drive is not in use.
Caution
Possible equipment problem:
You must open the library’s front
door before attempting to manually mount a cartridge to an
Ultrium drive. A unique communication between the library and
drive prepares the drive for manual operation.
2.
Open the tape library right front door by pulling on the left side of the
door.
3.
Open the library left front door by using a latch key to unlock both locks.
See
Figure 32
on page 123. Turn the key counter clockwise to unlock
them, then pull open the door.
4.
Locate the cartridge (see
Locating a Cartridge in the Storage Cells
on
page 127).