HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 54
Drive Configuration, Set Drive Scsi Id Menu, Hp Lto Id: 02, Valid Range 0 - 15, Scroll Up To Incr
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 2 Figure 18 Drive Configuration The Drive Config Menu lets you modify each drive's configuration. Figure 18 on page 53 shows an example screen. For each drive, the menu displays: I Drive position I Drive type I If the drive path is SCSI, the drive's SCSI ID and its SCSI bus relationship with the library. Sub-menus let you change the SCSI ID and configure whether the drive is on the same SCSI bus as the library. For more information, see Drive Entries on page 76. Note The cursor position is saved on all screens that list the library's drives. The panel displays 16 lines of data per menu. If your library contains more than eight drives, you must use the down arrow button to scroll to drives 08 and above. Drive Configuration Menu SET DRIVE SCSI ID MENU: 01 HP LTO ID: 02 VALID RANGE 0 - 15 SCROLL UP TO INCR SCROLL DOWN TO DECR SELECT TO SAVE MENU TO EXIT Chapter 2 Operator Panel 53