HP Surestore Tape Library Model 20/700 HP Surestore Tape Library Model 20/700 - Page 119
Operating in Demo Mode, If DEMO MODE is interrupted, Get-Put
View all HP Surestore Tape Library Model 20/700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Operating in Demo Mode With the library in Demo Mode (demonstration mode), the hand takes a data cartridge from a storage cell, moves the cartridge, and places the cartridge back into a different storage cell. Caution Audit update required: If DEMO MODE is interrupted, Get-Put Loop operations will become disrupted, and cartridges may not be returned to their original locations. When DEMO MODE completes, you must IPL to re-audit the library, and your backup software applications . You must then notify the customer to update the host cartridge database. To operate in Demo Mode: 1. Ensure the library and drives are not in use. 2. Press the [MENU] button until the Main Menu displays. 3. Press the arrow buttons until the cursor underscores DIAGNOSTICS. 4. Press the [SELECT] button. The panel displays the Main Diagnostics menu. 5. Press the arrow buttons until the cursor underscores DEMO MODE. 6. Press the [SELECT] button. The Demo Mode menu appears. 7. Use the arrow buttons to enter the desired number of loops. The up arrow button increases the value by 100; the down arrow button decreases the value by 100. Note HP does not recommend looping tests excessively. 118 Operating in Automated Mode Chapter 4