HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 107
Removing the Side Cover, Side Cover Removal Detail
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Removing the Side Cover Figure 6-3 Side Cover Removal Detail 1. Connect to ground with a wrist strap. See "Electrostatic Discharge " (page 103) for more information. 2. Loosen the blue retaining screw securing the cover to the chassis. See Figure 6-3. 3. Slide the cover from the chassis toward the rear of the system. 4. Place the cover in a safe location. Replacing the Side Cover 1. Orient the cover according to its position on the chassis. 2. Slide the cover into position using a slow, firm pressure to properly seat the cover. 3. Tighten the blue retaining screw securing the cover to the chassis. Removing and Replacing Covers 107
Removing the Side Cover
Figure 6-3 Side Cover Removal Detail
1.
Connect to ground with a wrist strap. See
“Electrostatic Discharge ” (page 103)
for more
information.
2.
Loosen the blue retaining screw securing the cover to the chassis. See
Figure 6-3
.
3.
Slide the cover from the chassis toward the rear of the system.
4.
Place the cover in a safe location.
Replacing the Side Cover
1.
Orient the cover according to its position on the chassis.
2.
Slide the cover into position using a slow, firm pressure to properly seat the cover.
3.
Tighten the blue retaining screw securing the cover to the chassis.
Removing and Replacing Covers
107