HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 71

Configuring LAN Information for the MP, To set the MP LAN IP address

Get HP rp8420 PDF manuals and user guides View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Figure 4-12 MP Main Menu Configuring LAN Information for the MP This section describes how to set and verify the server MP LAN port information. LAN information includes the MP network name, the MP IP address, the subnet mask, and gateway address. This information is provided by the customer. To set the MP LAN IP address: 1. At the MP Main Menu prompt (MP>), enter cm.From the MP Command Menu prompt (MP:CM>), enter lc (for LAN configuration). The screen displays the default values and asks if you want to modify them. Write down the information or log it to a file, as it might be required for future troubleshooting. NOTE: If the Command Menu is not shown, enter q to return to the MP Main Menu, then enter cm. Enter lc and press the Return key. The following screen is displayed: Configuring LAN Information for the MP 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
Figure 4-12 MP Main Menu
Configuring LAN Information for the MP
This section describes how to set and verify the server MP LAN port information. LAN
information includes the MP network name, the MP IP address, the subnet mask, and gateway
address. This information is provided by the customer.
To set the MP LAN IP address:
1.
At the MP Main Menu prompt (
MP>
), enter
cm.
From the MP Command Menu prompt
(
MP:CM>
), enter
lc
(for LAN configuration).
The screen displays the default values and asks if you want to modify them. Write down
the information or log it to a file, as it might be required for future troubleshooting.
NOTE:
If the Command Menu is not shown, enter
q
to return to the MP Main Menu, then
enter
cm
.
Enter
lc
and press the
Return
key. The following screen is displayed:
Configuring LAN Information for the MP
71