HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 83
BPS LEDs, PCI Power Supply LEDs, BPS LED Location, Table 5-2 BPS LEDs
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
BPS LEDs There is a single, three-color LED located on each BPS. Figure 5-2 BPS LED Location Table 5-2 BPS LEDs LED Indication Blink Green Green Blink Yellow Yellow Blink Red Red Off Description BPS in standby state and no faults or warnings BPS in run state (48 V output enabled) and no faults or warnings BPS in standby or run state and warnings present but no faults BPS in standby state and recoverable faults present but no non-recoverable faults BPS state may be unknown, non-recoverable faults present This LED state is not used BPS fault or failure, no power cords installed or no power to chassis PCI Power Supply LEDs There are three LEDs on the PCI power supply. The green power LED reports overall power status for the PCI power supply. The yellow attention LED is not currently used for status. The multi-colored fault LED reports faults and warnings. HP 9000 rp8420 server LED Indicators 83