HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 118

Removing the Cell Board, Cell Board Power LED

Get HP rp8420 PDF manuals and user guides View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

Removing the Cell Board NOTE: The cell board weighs 27.8 lb. Support both side edges while removing the cell board from the chassis. 1. Remove the right side cover. See "Removing and Replacing Covers" (page 104). 2. Power off the cell board using the MP command menu PE command. 3. Verify that the green power LED located on either the left-hand side or right-hand side of the cell board is off before removing the cell board. See Figure 6-17 for the power LED locations. Figure 6-17 Cell Board Power LED 4. Press each extraction lever and move the slide to the unlock position. See Figure 6-18. 118 Removal and Replacement

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
Removing the Cell Board
NOTE:
The cell board weighs 27.8 lb. Support both side edges while removing the cell board
from the chassis.
1.
Remove the right side cover. See
“Removing and Replacing Covers” (page 104)
.
2.
Power off the cell board using the MP command menu
PE
command.
3.
Verify that the green power LED located on either the left-hand side or right-hand side of
the cell board is off before removing the cell board. See
Figure 6-17
for the power LED
locations.
Figure 6-17 Cell Board Power LED
4.
Press each extraction lever and move the slide to the unlock position. See
Figure 6-18
.
118
Removal and Replacement