HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 73
Accessing the Management Processor through a Web Browser, Con the MP LAN. Refer
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Figure 4-14 The ls Command Screen To return to the MP main menu, enter ma. To exit the MP, enter x at the MP main menu. Accessing the Management Processor through a Web Browser Web browser access is an embedded feature of the MP. The Web browser allows access to the server through the LAN port on the core I/O card. MP configuration must be done from an ASCII console. NOTE: The MP has a separate LAN port from the system LAN port. It requires a separate LAN drop, IP address, and networking information from that of the port used by HP-UX. Before starting this procedure, the following information is required: • IP address for the MP LAN • Subnet mask • Gateway address • Hostname (this is used when messages are logged or printed) To configure the LAN port for a Web browser, perform the following steps: 1. Connect to the MP using a serial connection. 2. Configure the MP LAN. Refer to "Configuring LAN Information for the MP". 3. Type CMto enter the Command Menu. 4. Type SA at the MP:CM> prompt to display and set MP remote access. Accessing the Management Processor through a Web Browser 73