HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 177
B System Specifications, Dimensions and Weights, Electrical Specifications, Grounding
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
B System Specifications This chapter describes the basic system configuration and its physical specifications and requirements. Dimensions and Weights This section provides dimensions and weights of the server and server components. Table B-1 HP 9000 rp8420 server Dimensions and Weights Stand-alone Packaged Height-Inches (centimeters) 29.55 (75.00) 86.50 (219.70) Width-Inches (centimeters) 17.50 (44.50) 40.00 (101.60) Depth-Inches (centimeters) 30.00 (76.20) 48.00 (122.00) Weight-Pounds (kilograms) 368.001 (166.92) 813.002 (368.77) 1 This weight represents a fully-configured server before it is installed in a rack. 2 The packaged weight represents a server installed in a 2-m rack. The packaged weight includes a fully configured server in a 2-m rack with a rear door, rail slide kit, line cord anchor kit, interlock assembly, cable management arm, 120 lb ballast kit, and a 60A PDU. The shipping box, pallet, and container, not included in the packaged weight in Table B-1, adds approximately 150 lb to the total system weight when shipped. The size and number of miscellaneous pallets will be determined by the equipment ordered by the customer. Table B-2 provides component weights for calculating the weight of a server not fully configured. Table B-6 (page 182) provides an example of how to calculate the weight. Table B-7 (page 182) is a blank worksheet for calculating the weight of the server. Table B-2 HP 9000 rp8420 server Component Weights Quantity 1 1 1 2 6 1 1-4 1-4 1-2 Description Chassis System backplane PCI-X card cage assembly PCI-X power supply Bulk power supply Mass storage backplane Cell board Hard disk drive Removable media disk drive Weight (lb/kg) 131.00 (59.42) 20.0 (9.07) 20.40 (9.25) 5.00 (2.27) each 12.00 (5.44) each 1.00 (0.45) 27.80 (12.61) each 1.60 (0.73) each 2.20 (1.00) each Electrical Specifications This section provides electrical specifications for the HP 9000 rp8420 server. Grounding The site building shall provide a safety ground and protective earth for each AC service entrance to all cabinets. Install a protective earthing (PE) conductor that is identical in size, insulation material, and thickness to the branch-circuit supply conductors. The PE conductor must be green with yellow stripes. The earthing conductor described is to be connected from the unit to the building Dimensions and Weights 177