HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 124
X.X.X, MP:CM>, the other cells.
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
NOTE (1): X.X.X is the version number corresponding to the version of the PDHC firmware on the other cells. Example (rp8420 with SEU): MP:CM> fw ***** ***** ***** Firmware Update Utility ***** ***** ***** ***** (C) Copyright 2001 Hewlett-Packard Company ***** ***** All Rights Reserved ***** ***** ***** ***** THIS PROGRAM IS NOT LICENSED TO CUSTOMERS ***** ***** ***** ***** This program is intended for use by trained HP support ***** ***** personnel only. HP shall not be liable for any damages ***** ***** resulting from unauthorized use of this program. This ***** ***** program is the property of HP. ***** ***** ***** ***** Version 4.00 ***** ***** ***** Flash Current Number Cabinet Name Partition Handle Firmware Version (1) 1 0 MP 0 0 0 5.022 Master (1) 2 0 MP 1 1 1 5.022 Slave (3) 3 (2) 8 MP 0 0 32768 5.022 Master (3) 4 (2) 8 MP 1 1 32769 5.022 Slave 5 0 PDHC 0 0 256 3.012 - 6 0 SFW 0 0 320 21.003 - 7 0 PDHC 1 1 257 3.014 - 8 0 SFW 1 1 321 21.003 - (3) 9 0 PDHC 2 0 258 3.014 - (3) 10 0 SFW 2 0 322 21.003 - (3) 11 0 PDHC 3 1 259 3.014 - (3) 12 0 SFW 3 1 323 21.003 - Comments Enter the Entities to be upgraded (Ex: 3,4,10): 5 Enter your user name: anonymous Enter your user password: ******** Enter the ip address where the firmware can be found: 192.1.1.1 Enter the path where the firmware can be found: /dist/versionX_X Enter the filename of the firmware image for the PDHC: pdhc_A.X.X.X.bin Are you sure that you want to continue(Y/N): y **** Firmware Updating PDHC **** Firmware updating progress will be reported. NOTE (1): When a SEU is connected to an rp8420 system, cabinet id 8 will be assigned to the SEU. (2): These entities will only be seen on the rp8420. (3): X.X.X is the version number corresponding to the version of the PDHC Firmware on the other cells. 5. Ensure the entity selected was updated successfully. A successful update returns the following message: Firmware Update has completed successfully for all entities. MP:CM> An unsuccessful update results in an error message. If the FTP connection was successful, but the update failed, a warning will be noted for the entity being updated. For example: Firmware Update failed for entity SFW 0. DO NOT REBOOT SFW 0 until it has been successfully updated!!! Firmware Update completed with errors. 124 Removal and Replacement