HP rp8420 HP 9000 rp8420 Server - User Service Guide, Fifth Edition - Page 110

Replacing the Front Panel Board, Front Panel Board Detail

Get HP rp8420 PDF manuals and user guides View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

Figure 6-6 Front Panel Board Detail Replacing the Front Panel Board 1. Position the front panel board within the front panel assembly. Ensure the standoffs on the board are aligned with the screw holes in the front panel assembly. 2. Secure the board to the assembly with the three screws (inner two top screws and one bottom screw) retained during removal. 3. Route the cable in the same manner as it was removed and connect the cable to the system backplane. 4. Reinstall the front panel bezel. Use care when aligning light pipes and then screw back into place. 5. Replace the top cover. 6. Replace the left side cover. 7. Replace the front bezel. 8. Power on the system. 110 Removal and Replacement

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
Figure 6-6 Front Panel Board Detail
Replacing the Front Panel Board
1.
Position the front panel board within the front panel assembly. Ensure the standoffs on the
board are aligned with the screw holes in the front panel assembly.
2.
Secure the board to the assembly with the three screws (inner two top screws and one bottom
screw) retained during removal.
3.
Route the cable in the same manner as it was removed and connect the cable to the system
backplane.
4.
Reinstall the front panel bezel. Use care when aligning light pipes and then screw back into
place.
5.
Replace the top cover.
6.
Replace the left side cover.
7.
Replace the front bezel.
8.
Power on the system.
110
Removal and Replacement