IBM 4851 514 Service Guide - Page 40
free-standing
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Mounting the SurePOS 500 Model 514 Updated October, 2008 441.52 mm (17.38 in.) 90 mm (3.54 in.) 149 mm (5.87 in.) 128 mm (5.04 in.) 66.22 mm (2.6 in.) 7 mm (0.28 in.) 340 mm (13.39 in.) 66.22 mm (2.6 in.) 95 mm (3.7 in.) 260.16 mm (10.24 in.) 40.72 mm (1.6 in.) 343.02 mm (13.51 in.) 45.76 mm (1.8 in.) 64.1 mm (2.52 in.) Figure 16. Countertop integration tray pattern with display and countertop cutout on right side Note: Acquire the four mounting screws before you begin this installation. 1. For a free-standing unit, ensure that the four rubber feet H are installed on the bottom of the countertop integration tray (as shown in Figure 19 on page 26). 2. To secure the countertop integration tray to a countertop, perform the following steps: a. Detach the plastic fence from the countertop integration tray. To detach the plastic fence: 1) Spread the rear sides away from the tray as shown in Figure 17. Figure 17. Detaching the fence from the tray 2) Alternating from side to side, slide the plastic fence B about 7 mm (0.25 in.) until the plastic fence is detached from the metal integration tray A , as shown in Figure 18 on page 25. 24 SurePOS 500 Model 514