IBM 4851 514 Service Guide - Page 74
Backlight, removal, replacement, Tablet, touch
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removing and replacing FRUs Updated October, 2008 Backlight card - removal and replacement 1. Remove the tablet as described in "Display tablet - removing and replacing" on page 55. 2. Remove the tablet rear as described in "Display tablet back cover" on page 55. Figure 43. Location of EMC shields and common screw 3. Remove the backlight EMC shield ( B in Figure 43) by removing the common screw ( A ) securing both the backlight and touch card EMC shield. 4. Slide the shield forward and lift to remove. 5. Disconnect the cables from the backlight card. 6. Remove the two screws holding the card and lift to remove. 7. To replace, reverse these procedures. Tablet touch card - removal and replacement 1. Remove the tablet as described in "Display tablet - removing and replacing" on page 55. 2. Remove the tablet rear as described in "Display tablet back cover" on page 55. 3. Remove the common screw (see A in Figure 43) securing both the backlight EMC shield and the tablet touch EMC shield. 58 SurePOS 500 Model 514