IBM 4851 514 Service Guide - Page 46
thumbscrews
![]() |
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Mounting the SurePOS 500 Model 514 Updated October, 2008 b. Attach the SurePOS 500 Series base mounting plate A to the right side of the integration tray. Slide the front of the plate under the appropriate pair of tabs on the integration tray. Secure the rear of the plate to the tray with two thumbscrews as shown in Figure 23. B C A Figure 23. Attaching mounting plate to the cash drawer integration tray c. Attach the printer base mounting plate C to the integration tray. Slide the front of the plate under the appropriate pair of tabs on the integration tray. Secure the rear of the plate to the tray with two thumbscrews. d. Attach the printer B to the printer base mounting plate by sliding it onto the two tabs until it locks in place. 5. Plug the cash-drawer cable into the cash drawer and route it under the cable-tie bar to the rear connector panel. 6. Plug the data and power cables into the printer, routing the data cable toward the rear connector panel. 7. Route all cables through the hole at the center rear of the cash drawer. Then route the cables through the rear of the system, laying them flat on top of the cash-drawer integration tray. 30 SurePOS 500 Model 514
![](/manual_guide/products/ibm-4851-514-service-guide-fdcec3e/46.png)