IBM 4851 514 Service Guide - Page 80
connector, panel, tailgate, removing, replacing
![]() |
View all IBM 4851 514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Removing and replacing FRUs Updated October, 2008 Figure 49. Cable-tie bar remove and replace 2. Remove the screw A and thumbscrew B , as shown in Figure 49. 3. Disconnect all cables from the tie bar by cutting the cable ties. To replace the cable-tie bar, reverse this procedure. Rear connector panel (tailgate) with fan - removing and replacing 1. Remove the rear cover as described at "Rear cover - removing and replacing" on page 61. 2. Disconnect all cables from the tailgate connector. See Figure 3 on page 5 for the SurePOS 500 Model 514 connectors. 64 SurePOS 500 Model 514
![](/manual_guide/products/ibm-4851-514-service-guide-fdcec3e/80.png)
2.
Remove
the
screw
±A²
and
thumbscrew
±B²
,
as
shown
in
Figure
49.
3.
Disconnect
all
cables
from
the
tie
bar
by
cutting
the
cable
ties.
To
replace
the
cable-tie
bar,
reverse
this
procedure.
Rear
connector
panel
(tailgate)
with
fan
–
removing
and
replacing
1.
Remove
the
rear
cover
as
described
at
“Rear
cover
–
removing
and
replacing”
on
page
61.
2.
Disconnect
all
cables
from
the
tailgate
connector.
See
Figure
3
on
page
5
for
the
SurePOS
500
Model
514
connectors.
Figure
49.
Cable-tie
bar
remove
and
replace
Removing
and
replacing
FRUs
Updated
October,
2008
64
SurePOS
500
Model
514